DLEAP RECEIVED 50 SETS OF XOs FROM OLPC ASIA FOR DEPLOYMENT

OLPC ASIA has contributed 50 sets of XOs for deployment in Malaysia via our dLEAP projects.

40 sets have been couriered out for deployment to CheWong Orang Asli village at Kuala Gandah and at a TEMERLOH project.

Another 10 sets were couriered out by FeDex to a university in Kuching, Sarawak, Malaysia.

The dLEAp PROJECT BACKGROUND

dLEAP PROJECT NOT CHOSEN FOR FINALS

Consortium of Institutes on Family in the Asian Region
“Converging professional wisdom for family well-being”
Tel: (852) 2859 5300 Fax: (852) 2559 1813
Email: info@cifa-net.org
6/F Tsan Yuk Hospital, 30 Hospital Road, Hong Kong

Mr. T.K. Kang
ENGMEPHO PROFESSIONAL ENTERPRISE SDN BHD
1st Floor, 14A Jalan Pandan Indah 4/8
55100 Kuala Lumpur, Malaysia

25 July, 2016

Dear Mr. Kang,

Wofoo Asian Award for Advancing Family Well-being (3A Project) 2016

I am sorry to inform you that your Project “Digital Learning & Education Asli Project (dLEAP)” has not been shortlisted to enter into the Final Round Adjudication.

The adjudication panel appreciates the efforts and enthusiasm demonstrated by all teams entering the Second Round Adjudication, especially their very positive responses and participation at the Interview Session on 14 and 15 July, 2016.

They had a difficult time to complete the task of short listing the 8
finalists for the Final Round Adjudication, due to the high quality of the projects.

Throughout the adjudication process, the panel members have made some observation on the presentation of projects by the various teams, and advised that more attention could be made on the
following:

a) The significance of the project in advancing family well-being.
b) The theoretical framework of the project in terms of understanding of the
     issues and  approaches/models adopted to achieve the objectives.
c) The evaluation framework regarding output, outcome, effectiveness,
     and the  methodology adopted  to measure success.
d) The applicability of project in different cultural context.
e) Sustainability of the project and readiness to transfer knowledge
    and experience with counterparts in the region.

Despite that your team has not been selected for the Final Round, we would like to invite you to participate in the 5 th CIFA Regional Symposium at the National Museum of Korea at Ichon-dong, Korea
to be held on 3 - 5 November, 2016 to meet the participants from other parts of the Asian region.
You  are also encouraged to present your project at the Concurrent Session to be held in the morning on 4  November, 2016.

If you decide to do so, please submit your abstract to the Scientific Committee on or  before 31 August, 2016.

For details, please refer to the instructions on the Symposium website at
http://cifa2016seoul.org.

In appreciation of your active and enthusiastic participation in the Wofoo 3A Project 2016, a Certificate of Appreciation will be presented to your team at the Award Presentation Ceremony to be held on 4  November, 2016 at the Gala Dinner of the Symposium.

We sincerely hope that you will join us on the occasion.

Please register early for the Symposium.

For details please refer to http://cifa2016seoul.org and http://www.cifa-net.org.

Once again, I would like to take this opportunity to thank your organization for your interest and participation in this regional initiative and we look forward to your continuous support to the work of
CIFA.

Yours sincerely,
Patricia CHU
Chairperson
c.c. Resource Person: Ms. Monica Ng

dLEAP PROJECT SHORTLISTED AS ONE OF 16 SEMI FINALIST

Consortium of Institutes on Family in the Asian Region

Mr. T K. Kang
ENGMEPHO PROFESSIONAL ENTERPRISE SDN BFID
lst Floor, 14A Jalan Pandan Indah4lS;
55 100 Kuala Lumpur, Malaysia

8th. April,2016

Dear Mr. Kang,

Wofoo Asian Award for Advancing Family Well-being (3A Project) 2016 - Second Round

Congratulation! Your project 'Digital Learning & Education Asli Project (dLEAp)" has been short-listed to enter into the second round competition!

You may like to note that we have received very encouraging response, with a total submission of 36 projects from 6 countries/regions.

Having gone through the challenging process of vetting these of projects by the Screening Committee, l6 outstanding projects have ultimately been shortlisted for second round competition.

As required (see the attached guideline), you are requested to submit the 5000 words project  description in English to the CIFA Secretariat either by mail or courier not later than 5:00pm on
30 May, 2016 (according to postal chop date).

An interview will be arranged either on 14 or 15  July, ,2016, in person or via tele/vide,o conferencing for clarification and elaboration of the entries before 8 projects will be selected to ertter into the Final Round Adjudication.

Detail of the interview will be confirmed in due course.

You may like to note that each of the 8 finalist teams will be
required to submit an audio-visual presentation of their project upon further notice.

CIFA is planning to produce a Brochure/DVD to highlight all the projects short-listed for the  second.round adjudication.

In this context, you are requested to forward your agency logo, and a synoprsis of 300 words as spelt out in the guideline on or before 10 June, 2016 to CIFA Secretariat.

In order to facilitate your preparation of the second round submission and the Interview Session, a ""Resource Person" has been assigned to your organization to provide support with immediate effect.

Should you have any enquiries, you are welcome to contact her.

Name of Resource Person: Ms. Monica Ng
Contarct no.: (852)9306 8146
E-mail address: ltng@swk.cuhk.edu.hk

Once again, thank you for your interest and participation in this regional initiative and we look  forward to your full support and contribution in this meaningful endeavor.

Yours sincerely,
Patricia CHU
Chairperson

" Converging Profession al Wisdom for Family Well-Being!'
Tel: (852) 2859 5300 lia:r: (852) 2559 l8l3 Email: info@cifa-net.org
6/F Tsan Yuk Hospital, 30 Hospital Road, Hong Kong

EMP MALAYSIA QUOTES PRE-VULCANIZER AND VULCANIZING SYSTEM FOR LATEX MATTRESS PRODUCTION

In order for our project division to expand our downstream industrial and heating systems, our company was given the opportunity to design and offer our pre- vulcanizing and vulcanizing system for a latex mattress production plant.

Our system is 50 meters on length and capable of vulcanizing 25 sets of latex moulds.

EMP MALAYSIA PROJECT DIVISION SUBMITTED TSR 20 PROCESSING LINE

Yesterday, our project division submitted our quotation for a 1.5mt/hour TSR 20 rubber processing line.

The line included a pre-cleaning line, creeping line and a final reduction process using a shredder system.

Drying is by steam heating and a diesel system as backup.

Baling is by our 100 tonnes moving chamber automatic hydraulic press.

For enquiries, please email us at twkang@emp.com.my or tszwongkang@gmail.com

EMP MALAYSIA INVITED TO QUOTE TSR 20 LINE FOR OVERSEAS PROJECT

Our company has been invited to quote for a 1.5 Mt/hour TSR 20 line. The project is in overseas.

This Malaysian plantation group has recently acquired a rubber plantation overseas and intend to expand the current TSR production.

One of the special request is that the new dryer must be operated with steam heating.

Our company will be submitting the complete TSR 20 line with steam heating for the dryer next week.

EMP INVITED TO DESIGN PREVULCANISER AND VULCANIZING SYSTEM FOR LATEX PRODUCT

One of our long term Thai client has invited our company to design a PREVULCANISER and vulcanizing system for their proposed latex product.

We have already come up with a heating system for this production.

MR KANG TRAVELS TO SOUTHERN THAILAND TO INSPECT EMP SKIM BLOCK PLANT

Mr. Kang, our MD has travelled to Southern Thailand to inspect our EMP Skim Block rubber processing plant.

It was installed and commissioned last year and the visit is to train our client's staff on operation and maintenance.

Trouble shooting and feedback are expected.

Since the skim line was installed, the skim crepe production has been stopped.

EMP MALAYSIA PROJECTS DIVISION TO SUBMIT CREPE PROCESSING TENDER

Our Project Division was invited by a local Malaysian company to tender for a local Rubber institute tender for a crepe processing factory.

Only eight companies have taken the tender documents for this proposed project which is funded by the Malaysian government. We were informed that at least one overseas company will also for bidding for the project.

The tender is closing by end March 2016 and our company has finalised our prices for submission.

If successful, this project is expected to be completed by the end of 2016.

Besides crepe rubber processing, our company specialises in designing rubber systems for sheet, crumb rubber and other specialist works like biomass power plant, dual fired heating systems and oil palm processing plants as well.

Interested companies can email us your enquiries to: twkang@emp.com.my or tszwongkang@gmail.com.

EMP MALAYSIA TRADING DIVISION TO EXPORT BIODEGRADABLE FERTILIZER

In order for our company to expand our export business, our company intends to export a proven biodegradable fertilizer for agricultural production.

Specially formulated biofertilizer is suitable for various types of agricultural crops including rubber, oil palm. Plantation owners can also apply our biodegradable fertilizer.

For quotation, please email us at twkang@emp.com.My.

GOOD START TO 2016

We received an order for one set of Riello Press 2G high/low diesel burner just at the end of 2015. We shipped it out by TNT Express to our client in Thailand.

On the first week of January 2016, our Managing director flew over to Southern Thailand to inspect and commission our 1mt/hour Skim block processing line.

The wet process line is our standard process line but our 1mt/hour dryer is our specially designed hybrid dryer.

It has dual heating systems. It can be heated by using steam and by a gas system or both.

We fine tuned the dryer system and it is operating to our design parameters.